T.EM.I.T. Treatment and Maintenance Heating System
Both products prevent the adhesion of carbonates and protect the system from oxidation and corrosion, the main difference being that FILMAX 9.0 is a corrosion inhibitor that should be used specifically in those cases where the liquid circulating in the system does not exert sufficient passivation on the metal parts of which it is composed, for example, after excessive exploitation of the circulating antifreeze, it becomes necessary to replenish the package of inhibitory salts.
Noises in the boiler are the result of localized boiling of water. This happens when the inner surface of the boiler overheats due to scale deposits or heat-hardened sludge. Over five years, all systems can suffer from noise, and new boilers in old systems are particularly vulnerable. FILMAX 8.0 is an ideal FDA product to solve this kind of problem because of its special anti-noise, deoxygenating and deferrizing action.
Yes, DISINEX is an inhibited acid-based descaling agent with a color-depletion indicator that can be used in a wide range of applications: to remove rust and corrosion from metal structures, to remove lime scale from pipes and closed circulation systems of boilers and heat exchangers, to pickle concrete, and to remove traces of oxidation from various metals. The initial pink coloration of DISINEX changes to orange-yellow when the acid has lost effectiveness.
Once the sealing of the system has taken place, the product can remain in the circuit for a maximum of thirty days; after that, the system should be drained, flushed and refilled with water.
ALIGEL, ALIGEL HC20BIO and ALIGEL HC30BIO are antifreeze agents based on monopropylene glycol, and due to their non-toxic characteristics and high resistance to temperature changes, they can also be used in vacuum panels.
There are certainly algae formed due to the air permeability of the system, also favored by the water temperature on 35 to 40 °C. In such cases, it is necessary to clean the system with the broad-spectrum biocide THERMAKIL, circulating with special DISIFLUX pump with high head. It normally takes only 30 to 60 minutes to break down even the most stubborn forms of aerobic and anaerobic bacteria.
Yes, with FASTOP-SOLAR which is a self-sealing liquid specially designed for circuits containing antifreeze or anti-corrosive additives.
Yes, SOLAR CLEAN in fact is a quick and effective cleaner specifically designed to remove with extreme speed sludge and sludge generated by solar fluids degraded by over-exploitation and high temperature changes that could create clogging in collector pipes.
In case of limescale/fouling phenomena, I need to add food-pure polyphosphates to the drinking water, which prevent the formation of limescale and consequent corrosive effects due to carbon dioxide formation.
Yes, after filtration on the drain with a wire-wound disposable cartridge such as ns WL-CART FA. However, since it is water additivated with chemicals, we always recommend disposal performed in accordance with current regulations (Decree No. 152 of 2006), turning to certified companies if possible.
Yes, after this period has elapsed, the active ingredients have been leached out so, in order to have full protection, you need to change the bag every six months.
By means of a manual loading pump, or more simply with special FILTANK equipment, i.e., an additive dispenser for thermal systems, practical and economical suitable for boilers or radiators.
Yes, NEUTRAL is an alkaline product that neutralizes residual acidity after descaling processes have taken place in thermal systems, heat exchangers, radiators, etc. It also allows the neutralized solutions to be discharged into the sewer, in compliance with Environmental Decree No. 152 of 2006.
The ideal product is WL-SANIFAST, which is based on stabilized chlorine dioxide, is a much more effective and faster product than traditional chlorine and leaves no traces or unpleasant odors to the water; it is specific for the treatment of collecting water in tanks, cisterns, and tubs, thanks to its broad-spectrum biocidal power.
In order to solve the Legionella and Pseudomonas inconvenience, it is good to treat the domestic hot water with WL-SANIFAST, a chlorine dioxide-based product with broad-spectrum biocidal power, which can with a single treatment, sanitize the entire system.
Yes, Facot Chemicals provides its customers with specific colorimetric kits for the determination of hardness (calculated in French degrees), Molybdenum (mg/lt or ppm) and Dissolved Iron (mg/lt or ppm) parameters.
Bonding and sealing
Facot Chemicals provides its customers with the paste products ECOGRYP, SILICON, KOLGAS and KOLGAS-UNI, four different types of anti-seize and antioxidant mastic that can provide anti-drying protection over time against hemp and treated gaskets.
Yes, in fact, a single treatment with GO-SIL, sprayed on the affected surface (glass, metal, plastic, etc.), is sufficient in order to completely remove unwanted silicone residues.
The specific product for this kind of problem is NEOGIT, a special welding adhesive available for both low-pressure (NEOGIT-LP) and high-pressure (NEOGIT-HP) bonding operations.
Yes, in fact, the product is thermally stabilized and maintains some elasticity up to 300 °C, with peaks of 350 °C. Applicable on exteriors of chimneys, flues, industrial drains, flanged couplings, ovens, exchangers, etc.
Absolutely yes, it is compatible with all metals and plastic materials and is suitable for use in solar panel installations. In fact, it does not alter the odor, taste or purity of water.
The product complies with all regulations for cold, hot and glycol gas and drinking water up to a temperature of 160 °C with peaks of 180 °C. In the case of gas applications SILICON TAPE can be used up to pressures of 5 Bar at a temperature of 70 °C. In the case of water applications, it is usable up to pressures of 16 Bar at a temperature of 95 °C, and up to pressures of 7 Bar at a temperature of 130 °C.
CRYSTAL BOND is a silane-based crystalline sealant-glue of the highest quality, is over-paintable and adheres even to damp surfaces. It can also be used for bonding and sealing boat decks, metal construction and bodywork, cold storage, natural stone and marble, PVC, glass, wood, concrete etc.
ACRILONE is a one-component paintable sealant based on fungicidal polyacrylic dispersion with good weather resistance. Especially suitable for joints in the prefabricated field, it allows movement and deformation up to 15 percent of the original joint width.
PTFE Seal is a removable anaerobic sealant containing PTFE and is suitable for making the threads of chemicals, gas, LPG, methane, hydrocarbons, oils, naphtha, hot and cold water, compressed air, etc. watertight. The product is suitable for all metals including stainless steel.
Yes, BIG SEAL is an anaerobic sealant specifically designed to treat large threads (over two inches) for gas, LPG, methane, hydrocarbons, oils, naphtha, water, etc.
Before sealing, it is good to treat the surface with CLEAN SEAL, a degreasing detergent that can clean any material before it is treated with the appropriate adhesives (GAS SEAL, NEOGIT, etc.).
Cleaning – Household Products
With KIL HANDWASHING PASTE, it quickly cleanses hands soiled by dirt of all kinds and can also be used on hard surfaces, while on the skin it removes dirt without irritating the skin and leaves hands soft.
The DISSOL product range includes fast-acting acid and strong alkaline unblocks specifically for unblocking toilets, sinks, and industrial drains. The products are inhibited toward corrosion of metals and do not damage pipes if used correctly, following the directions on the label and data sheet. They work excellently with all organic substances that normally clog the drain.
NAUTICHEM is the specific product for this kind of problem, it is an antibacterial disintegrator with sanitizing action, it not only eliminates unpleasant odors, but also reduces the formation of gas and prevents fouling of deposits on the inner surface of the black water tank.
Certainly, FIRENET is a specific product for penetrating, dissolving and removing without scrubbing, carbon and sooty residues, fouling, animal fats and other greases from surfaces such as fireplace glass, barbecues, ovens, stovetops, countertops and tools; it is also excellent in the removal of greasy sludge in the workshop.
DISSOLINE is a descaling powder for the rapid dissolution of limescale; also suitable for sinks, bathrooms, toilets, boiler coils, irons, etc.
The specific product in this case is called MUFFANET, which can instantly dissolve mold, algae and moss from the surfaces of wet places such as bathrooms, showers, toilets, basements, kitchens, saunas, whirlpools, swimming pools, flower pots, etc. with a single pass.
Pool Treatment
Every day, microorganisms, contaminants, algae spores, bacteria, dust, soot and dirt that are harmful to the health of swimmers are introduced into your pool water. Dirt particles and turbidity are removed by a good filtration system, while microorganisms, algae, bacteria and viruses require appropriate bactericidal chemical treatment.
A predilution of the product in a bucket before putting it into the pool is recommended; generally 8 ÷ 10 grams of product per cubic meter of water to be treated is sufficient to raise the pH by 0.1 unit.
Yes, POOL TRIPLEX is a product that can slowly release the active chlorine contained within it and therefore guarantees a triple action over time.
Absolutely yes, the kit allows you to determine the concentration of total chlorine in your pool water; in fact, you will simply need to take a sample of the water in question with the test tube and add the reagent provided; the intensity of the color will be compared with the chromatic scale to determine the total chlorine in mg/lt. With the pH reagent, on the other hand, it will be possible, with the same kit, to also measure the pH of the water, essential for obtaining stable water that is not aggressive towards the skin of swimmers.