Water-based cleaner, cleans and degreases all surfaces
Solvent-free and acid-free, ideal before gluing, sealing, welding, coating, Skin safe, fully biodegradable. Can be used with high-pressure cleaners and scrubbers, diluted to 1/10. Suitable for all surfaces, vehicles (inside and outside), extremely dirty fabrics. Complies with HACCP regulations.
- Cleaning and degreasing with normal dirt.
Apply HP Clean to dirt or encrustations (always from the bottom upwards). Scrub, rinse with water and dry with a cloth.
- Cleaning and degreasing in the case of stubborn dirt
Then apply a generous amount of HP Clean to the dirt and leave for at least 5 minutes (depending on the degree of dirt).
For application on vertical surfaces, we recommend working from the bottom upwards.
In the case of stubborn dirt and porous surfaces, scrub with a semi-hard brush. Then rinse with clean water.
Repeat if necessary
- Deep cleaning of surfaces (e.g. for oil stains on concrete)
Spray Tec7 Cleaner on the oil stain and leave for at least 5 minutes.
Scrub gently with a semi-hard brush and reapply Tec7 Cleaner. Leave for at least 5 minutes.
Then apply a generous amount of HP Clean to the dirt and leave for at least 5 minutes.
Scrape gently with a semi-hard brush.
Apply HP Clean to the dirt again and leave to act.
Remove the dirty soap residue with clean water using a garden hose or, better still, a pressure washer.
If necessary, the treatment can be repeated
| Codes |
Sizes |
Qt. |
Pcs. Pallet |
| 492001 |
1 lt with trigger sprayer |
10 |
390 |
| 492005 |
5 lt jerrycan |
4 |
96 |
